Sensitivity analysis of the hydrological and hydraulic parameters of the SWMM model and its application in urban drainage systems
DOI:
https://doi.org/10.13140/RG.2.2.26994.66248Keywords:
urban drainage, SWMM, hydrological parameters, hydraulic parametersAbstract
Simulation models are widely used for the design and management of urban drainage systems, such as the SWMM Stormwater Management Model. However, the quality of its results is directly related to the quality of the data provided, since an incorrect estimate of these may lead to a different behavior than expected in the real case. There is uncertainty in many hydrological and hydraulic input parameters of the model, since most of them are estimated and there are no measured data to calibrate it. In this work a sensitivity analysis is carried out to various parameters to detect the most influential in the simulation of urban drainage systems. It consisted of locally varying each of the parameters and assessing their influence on the variation of the flows and maximum levels at a point in the Copacoa Urbanization, Palavecino municipality of the Lara State, Venezuela. From the results obtained, it is concluded that for simulations of urban watersheds where impervious areas predominate, the least sensitive method for the generation of the rain hietrogram is that of alternate blocks, while the one with the greatest variability is the triangular hietrogram. Regarding the basin component, the most sensitive parameters are the percentage of impermeable area, the slope of the basin and the Manning coefficient assigned to the impermeable area. In relation to the duct, the Manning coefficient parameter also presented an appreciable sensitivity, but of a lesser magnitude compared to those obtained for the basin component.
Downloads
References
[2] Enviromental Protección Agency (EPA), «Software SWMM vE5.0» North Caroline, United States, https://www.epa.gov/water-research/storm-water-management-model-swmm, 2005
[3] Enviromental Protección Agency (EPA), «User´s Manual, SWMM vE5.0» North Caroline, United States, 2005
[4] M. San Isidro, «Proceso de validación de modelos de simulación» Informe Técnico. Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, Madrid, España, 1998
[5] J. Bolinaga. «Drenaje Urbano» Instituto Nacional de Obras Sanitarias, Caracas, Venezuela, 1979
[6] V.T. Chow, «Hidrología Aplicada» Editorial McGraw-Hill interamericana, S.A. Santa Fe de Bogotá, Colombia, 1994
[7] A. Saltelli, S. Tarantola, F. Campolongo y M. Ratto, «Sensitivity analysis in practice» John Wiley & Sons Ltd. United Kingdom, 2004
[8] N. Bilal, «Implementation of Sobol’s method of global sensitivity analysis to a compressor simulation model» 22 International compressor Engineering Conference, 2014
[9] A. Saltelli, y K. Chan, «Sensitivity Analysis» John Wiley & Sons Ltd. United Kingdom, 2000
[10] J. Rincón y M. Muñoz, «Diseño hidráulico de sistemas de drenaje dual a través del modelo SWMM» Revista: Ingeniería hidráulica y ambiental, vol 34, nº 2, pp. 103-117, 2013
[11] L. Sánchez y Y. Martínez, «Sensibilidad y regionalización del parámetro impermeabilidad en una cuenca urbana» Revista: Tecnología y Ciencias del Agua, vol 4, nº 1, pp. 203-212, 2013 CSI Bridge, «Integrated 3-D Bridge Analysis», 2017
[12] E. Guevara, «Patrón de distribución del hietograma de las tormentas en Venezuela» III Congreso de Investigación en la Universidad de Carabobo. Valencia, Venezuela, 2000
[13] S. Chapra, «Surface water-quality modeling» McGraw-Hill, New York, United States, 1997
Published
How to Cite
Issue
Section
Copyrights of the author / s from the year of publication
This work is under international license Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0.
The opinions expressed by the authors do not necessarily reflect the position of the editor of the publication or UCLA. The total or partial reproduction of the texts published here is authorized, provided that the complete source and electronic address of this journal is cited. Authors have the right to use their articles for any purpose as long as it is done nonprofit. The authors can post on the internet or any other media the final approved version of their work.