Technology transference program in the area industrial automation

Authors

  • Christian Gonzalez Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela
  • Carmen Luisa Vásquez Stanescu Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela https://orcid.org/0000-0002-0657-3470
  • Ervin Naranjo Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela
  • William Osal Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela https://orcid.org/0000-0002-7736-3745

Keywords:

Industrial automation, plataform of remote communication, program of technological transference, distance learning (DL)

Abstract

The Automation is essential for the production of consumer goods worldwide. Research in this area introduces the institutions involved in technology transfer process to develop more complex systems. In 2008, between UPC and UNEXPO adopting a Technology Transfer Program. Distance education is now a great need for modern society. For this we have developed a plataform dedicated to the transmission of knowledge. However, in the area of Engineering, is essential, not only the transfer of knowledge, which is in person, but also the development of skills that are obtained by putting knowledge into practice with this platform It manages the training of researchers that will serve as multipliers to provide courses and practical activities. By virtue of its importance, received funding to various companies for the development of remote communication platforms with networking opportunities.

Downloads

Download data is not yet available.

Author Biographies

Carmen Luisa Vásquez Stanescu, Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela

Ingeniero Electricista. Doctora en Ciencias Técnicas. Profesora-Investigadora adscrita al Departamento de Ingenier´ıa El´ectrica, Universidad Nacional Experimental Polit´ecnica “Antonio Jos´e de Sucre”,
Vicerrectorrado Barquisimeto, Barquisimeto, Venezuela

William Osal, Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela

Departamento de Ingenier´ıa El´ectrica, Universidad Nacional Experimental Polit´ecnica “Antonio Jos´e de Sucre”,
Vicerrectorrado Barquisimeto, Barquisimeto, Venezuela

Publicaciones en Ciencias y Tecnologia Vol 3 nro 2 año 2009

Published

2009-10-28

How to Cite

[1]
C. Gonzalez, C. L. Vásquez Stanescu, E. Naranjo, and W. Osal, “Technology transference program in the area industrial automation”, Publ.Cienc.Tecnol, vol. 3, no. 2, pp. 23-30, Oct. 2009.

Issue

Vol. 3 No. 2 (2009): July-December

Section

Research Article

Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0 Internacional (CC BY-NC-SA 4.0)

The opinions expressed by the authors do not necessarily reflect the position of the publisher of the publication or of UCLA. The total or partial reproduction of the texts published here is authorized, as long as the complete source and the electronic address of this journal are cited.

The authors fully retain the rights to their works, giving the journal the right to be the first publication where the article is presented. The authors have the right to use their articles for any purpose as long as it is done for non-profit. Authors are recommended to disseminate their articles in the final version, after publication in this journal, in the electronic media of the institutions to which they are affiliated or personal digital media.