La Technological management in the supply chain in chemical companies: a review on binding terms 2011-2021

Authors

DOI:

https://doi.org/10.5281/zenodo.6982124

Keywords:

technological management, supply chain, chemical companies

Abstract

The article presents the findings of a systematic review immersed in the literature, focused on identifying the main elements of Technology Management in chemical industries. A total of 556 scientific articles were obtained using online scientific search engines. The analysis was exploratory/descriptive using the cocitation context analysis method, based on the perspective of the academic genealogy retrospective literature, statistics and distribution, making use of VOSviewer® co-occurrence to reflect the link chain of common thread, whose result denoted 30 binding terms to the study area, which are: Cost, gap, identification, implementation, improvement, policy, products, production, six sigma quality system, stakeholders, sustainable development, technique, capacity, collaboration, competitive advantages, customers, innovation, manufacturer, supplier, flexibility, integration, manufacturing companies, performance, relationships, supply chain management, adoption, data and uncertainty. In conclusion, the most relevant terms of Technology Management are obtained from the systematic review in the period 2011 to 2021, as well as these terms were grouped through data mining, obtaining 5 broadly defined clusters. Additionally, the main terms with propensity capacity and/or trends since 2018 are highlighted.

Downloads

Download data is not yet available.

Author Biographies

Juan Enrique Rodríguez Camacaro, Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela

Chemical Engineer, Magister Scientarium in Engineering in Process Control, Student of the Doctorate in Engineering Sciences with a Mention in Productivity from the Research and Postgraduate Department of the Antonio José de Sucre National Experimental Polytechnic University (UNEXPO). Assistant Professor in the Department of Chemical Engineering, Engineering Section, UNEXPO, Barquisimeto, Venezuela.

Elisa Marisol Verruschi Pigliacampo , Universidad Nacional Experimental Politécnica Antonio José de Sucre, Venezuela

Chemical engineer. Doctor in Environmental, Chemical and Materials Engineering. Full Professor (Retired), Department of Chemical Engineering, Engineering Section, UNEXPO, Barquisimeto, Venezuela.

References

P. Wong y Y. Wong, “Supply chain performance measurement system using DEA modeling”, Ind. manag. data syst., vol.107, no.3, pp.361-381, 2007. DOI: https://doi.org/10.1108/02635570710734271

R. A. Gómez-Montoya, A. Zuluaga-Mazo, N. P. Ceballos-Atehourtua y D. Palacio-Jiménez. “Gestión de la cadena de suministros y productividad en la literatura científica”, I+D Revista de Investigaciones, vol.14, no.2, pp.40-51, 2019. DOI: https://doi.org/10.33304/revinv.v14n2-2019004

C. Ramírez Meneses, “Evolución de la gestión de la SCy la logística, desde una visión tecnológica y sostenible”. Reto, 8, nº1, pp.22–31, 2021. DOI: https://doi.org/10.23850/reto.v8i1.2863

A. Najmi, M. R. Gholamian, y A. Makui, “Supply chain performance models: A literature review on approaches, techniques, and criteria”. J. Oper. Supply Chain Manag., vol.6, no.2, pp.94-113, 2013. DOI: https://doi.org/10.12660/joscmv6n2p94-113.

Scimago Journal & Country Rank. Scimago Journal & Country Rank Journal Rank. de Scimago Journal & Country Rank, 2021. https://www.scimagojr.com/journalrank.php?category=2209&area=2200&year=2021 (accedido 15 de febrero de 2022)

M. Flores Urbáez y C. Esposito de Díaz, Fundamentos básicos de la gestión de la tecnología: teoría y práctica. 1ra ed. Maracaibo: Vicerrectorado Académico Universidad del Zulia, 2014

E. Núñez de Schilling, “GT en la empresa: definición de sus objetivos fundamentales”. Revista de Ciencias Sociales, vol.XVII, no.1, pp.156–166, 2011.

E. Ortiz Pabón, y N. Nagles García, Gestión de Tecnología e Innovación. Teoría, proceso y práctica (2da ed.). Bogotá: Universidad EAN, 2013. DOI: https://doi.org/10.21158/9789587562552

J. L. Diaz Martinez, J. D. Ruiz Ariza, J. A. Contreras Salinas, y H. G. Hernández Palma, “Technology management to increase the efficiency of the supply chain”. Journal of Theoretical and Applied Information Technology, vol.95, no.19, pp.5264-5272, 2017. http://hdl.handle.net/11323/1607 (accedido 19 de febrero de 2022)

M. Gyimah-Concepcion, Technology in supply-chain management and logistics: what does the future hold? En A. Pagano, & M. Liotine, Technology in Supply Chain Management and Logistics. 1ra ed. Chicago: Elsevier, 2019. DOI: https://doi.org/10.1016/C2017-0-04194-0

A. M. Pagano y M. Liotine, Technologies in supply chain management and logistics. En A. M. Pagano y M. Liotine, Technology in Supply Chain Management and Logistics. 1ra ed. Chicago: Elsevier, 2019.

C. N. Jiménez, O. F. Castellanos, y M. E. Morales, “Tendencias y retos de la GT en economías emergentes”, Revista Universidad EAFIT, vol.43, no.148, pp.42-61, 2007. Obtenido de https://publicaciones.eafit.edu.co/index.php/revista-universidad-eafit/article/view/701

G. Degun, Unilever’s innovative supplier collaboration programme looks to the future. Supply Management, 2014. https://www.cips.org/supply-management/news/2014/september/unilevers-innovative-supplier-collaboration-programme-looks-to-the-future/ (accedido 17 de noviembre de 2021)

CEPAL-FAO. Perspectivas de la agricultura y del desarrollo rural en las Américas 2021-2022, 2021. https://repositorio.cepal.org/bitstream/handle/11362/47208/1/CEPAL-FAO21-22_es.pdf (accedido 21 de febrero de 2022).

OCDE-FAO. OCDE-FAO Perspectivas Agrícolas 2019-2028. Roma: OECD Publishing, 2019. https://read.oecd-ilibrary.org/agriculture-and-food/ocde-fao-perspectivas-agricolas-2019-2028_7b2e8ba3-es (accedido 11 de enero de 2022).

L. Zhang, y Y. Zhou, “Study on distribution network optimization of compound fertilizer supply chain”, IEEE Xplore, pp.1-6, 2009. DOI: doi:10.1109/ICMSS.2009.5302691

C. Forza, “Survey research in operations management: a process‐based perspective”, Int. J. Oper. Prod. Manage., vol.22, no.2, pp.152-194, 2002.

M. F. Barrera Morales, Técnicas de análisis en investigación técnicas de análisis cualitativo: análisis semánticos, de signos, significativos y significaciones. 1ra ed. Caracas: Quirón Ediciones, 2009.

Centre for Science and Technology Studies, Leiden University. vosviewer. https://www.vosviewer.com/ (accedido 2 de diciembre de 2021).

Centre for Science and Technology Studies, Leiden University. VOSViewer Manual. 1ra ed. L. University, 2021. https://www.vosviewer.com/documentation/Manual_VOSviewer_1.6.17.pdf (accedido 29 de noviembre de 2021).

S. Parkhi, S. Joshi, S. Gupta, y M. Sharma, “A Study of Evolution and Future of Supply Chain Management”, Symbiosis Inst. of Operations Management, vol.9, no.2, pp.95-106, 2015. DOI: 10.13140/RG.2.1.4705.2964

S. Lahane, R. Kant, y R. Shankar, “Circular supply chain management: A state-of-art review and future opportunities”, J. Clean. Prod., vol.258, pp.1-16, 2020. DOI: https://doi.org/10.1016/j.jclepro.2020.120859

W. A. Teniwut, y C. L. Hasyima, “Decision support system in supply chain: A systematic literature review”, Uncertain Supply Chain Manag., vol.8, pp.131-148, 2020. DOI: http://dx.doi.org/10.5267/j.uscm.2019.7.009

N. Wankhade, y G. K. Kundu, “Supply chain performance management: a structured literature review”, Int. J. Value Chain Manag., vol.9, no.3, p.209, 2018. DOI: https://doi.org/10.1504/ijvcm.2018.093885

H. Li, M. Yang, y S. Evans, “Classifying different types of modularity for technical system”, Int. J. Technol. Manag., vol.81, no.1–2, pp.1–23, 2019. DOI: https://doi.org/10.1504/IJTM.2019.101267

L. Gaikwad, y V. Sunnapwar, “An integrated Lean, Green and Six Sigma strategies: A systematic literature review and directions for future research”, The TQM Journal, vol.32, no.2, pp.201-225, 2020. DOI: https://doi.org/10.1108/TQM-08-2018-0114

B. Shen, X. Xu, H. L. Chan, y T. M. Choi, “Collaborative innovation in supply chain systems: Value creation and leadership structure”, Int. J. Prod. Econ, vol.235, no.108068, p.108068, 2021. DOI: https://doi.org/10.1016/j.ijpe.2021.108068

O. Ganbold, Y. Matsui, y K. Rotaru, “Effect of information technology-enabled supply chain integration on firm's operational performance”, J. Enterp. Inf. Manag.. vol.34, no.3, pp.948-989, 2021. DOI: https://doi.org/10.1108/JEIM-10-2019-0332

G. Büchi, y M. Cugno, y R. Castagnoli, “Smart factory performance and Industry 4.0”, Technol. Forecast. Soc. Change, vol.150, no.119790, p.119790, 2020. DOI: https://doi.org/10.1016/j.techfore.2019.119790

S. Tripathi, y M. Gupta, “A framework for procurement process re-engineering in Industry 4.0”, Bus. Proc.management J., vol.27, no.2, pp.439-458, 2021. DOI: https://doi.org/10.1108/BPMJ-07-2020-0321

P. Jonsson, y J. Holmström, “Future of supply chain planning: closing the gaps between practice and promise”, Int. j. phys. distrib. logist. manag., vol.46, no.1, pp.62-81, 2016. DOI: https://doi.org/10.1108/IJPDLM-05-2015-0137

S. Prakash, G. Soni, y A. P. S. Rathore, “A critical analysis of supply chain risk management content: a structured literature review”, J. Adv. Manag. Res., vol.14, no.1, pp.69-90, 2017. DOI: https://doi.org/10.1108/JAMR-10-2015-0073

J. Uhlemann, R. Costa, y J. C. Charpentier, “Product design and engineering in chemical engineering: Past, present state, and future”, Chem. Eng. Technol., vol.42, no.11, pp.2258–2274, 2019. DOI: https://doi.org/10.1002/ceat.201900236

M. R. De Giacomo, y R. Bleischwitz, “Business models for environmental sustainability: Contemporary shortcomings and some perspectives”, Bus. Strat. Environ., vol.29, no.8, pp.3352–3369, 2020. DOI: https://doi.org/10.1002/bse.2576

D. Fischer-Preßler, K. Eismann, R. Pietrowski, K. Fischbach, y D. Schoder, “Information technology and risk management in supply chains”, Int. j. phys. distrib. logist. manag., vol.50, no.2, pp.233-254, 2020. DOI: https://doi.org/10.1108/IJPDLM-04-2019-0119

S. Jawad, y A. Ledwith, “Analyzing enablers and barriers to successfully project control system implementation in petroleum and chemical projects”, Int. J. Energy Sect. Manag., vol.15, no.4, pp.789-819, 2021. DOI: https://doi.org/10.1108/IJESM-08-2019-0004

Y. Shou, J. Shao, y W. Wang, “How does reverse factoring affect operating performance? An event study of Chinese manufacturing firms”, Int. J. Oper. Prod. Manage., vol.41, no.4, pp.289-312, 2021. DOI: https://doi.org/10.1108/IJOPM-07-2020-0469

R. Zimmermann, L. M. D. F. Ferreira, y A. Carrizo Moreira, “The influence of supply chain on the innovation process: a systematic literature review”, Supply Chain Management, vol.21, no.3, pp.289-304, 2016. DOI: https://doi.org/10.1108/SCM-07-2015-0266

R. Mishra, “Configuration of volume flexibility in Indian manufacturing firms: evidence from case studies”, Int. j. qual. reliab. manag., vol.35, no.1, pp.232-265, 2018. DOI: https://doi.org/10.1108/IJQRM-12-2015-0174

N. Sick, N. Preschitschek, J. Leker, y S. Bröring, “A new framework to assess industry convergence in high technology environments”, Technovation, vol.84–85, pp.48–58, 2019. DOI: https://doi.org/10.1016/j.technovation.2018.08.001

C. G. Machado, M. Despeisse, M. Winroth, y E. H. D. R. da Silva, “Additive manufacturing from the sustainability perspective: proposal for a self-assessment tool”, Procedia CIRP, vol.81, pp.482–487, 2019. DOI: https://doi.org/10.1016/j.procir.2019.03.123

H. G. da Silva, J. C. E. Ferreira, V. Kumar, y J. A. Garza-Reyes, “Benchmarking of cleaner production in sand mould casting companies”, Manage. Environ. Qual., vol.31, no.5, pp.1407-1435, 2020. DOI: https://doi.org/10.1108/MEQ-12-2019-0272

A. B. Abdallah, y H. F. Ayoub, “Information technology drivers of supply chain agility: implications for market performance”, Int. j. product. qual. manag., vol.31, no.4, p.547, 2020. DOI: https://doi.org/10.1504/ijpqm.2020.111674

R. F. Fachini, K. F. Esposto, y V. C. B. Camargo, “A framework for development of advanced planning and scheduling (APS) systems in glass container industry”. J. Manuf. Technol. Manag., vol.29, no.3, pp.570-587, 2018. DOI: https://doi.org/10.1108/JMTM-06-2017-0126

S. S. Panigrahi, y N. S. Rao, “A stakeholders’ perspective on barriers to adopt sustainable practices in MSME supply chain: Issues and challenges in the textile sector”, Res. J. Text. Appar., vol.22, no.1, pp.59-76, 2018. DOI: https://doi.org/10.1108/RJTA-07-2017-0036

A. Belhadi, “Smart factory implementation in morrocan phosphate industry”, SSRN Electronic Journal, 2020. DOI: https://doi.org/10.2139/ssrn.3637962

A. Jääskeläinen, H. Schiele, y L. Aarikka-Stenroos, “Getting the best solution from a supplier – A social capital perspective”, J. Purch. Supply Manag., vol.26, no.5, p.100648, 2020. DOI: https://doi.org/10.1016/j.pursup.2020.100648

H. Blichfeldt, y R. Faullant, “Performance effects of digital technology adoption and product & service innovation – A process-industry perspective”, Technovation, vol.105, no.102275, p.102275, 2021. DOI: https://doi.org/10.1016/j.technovation.2021.102275

D. Gohil, y S. V. Thakker, “BC-integrated technologies for solving supply chain challenges”, Modern Supply Chain Research and Applications, vol.3, no.2, pp.78–97, 2021. DOI: https://doi.org/10.1108/mscra-10-2020-0028

R. Mishra, A. K. Pundir, y L. Ganapathy, “Empirical assessment of factors influencing potential of manufacturing flexibility in organization”, Bus. Proc.management J., vol.24, no.1, pp.158-182, 2018. DOI: https://doi.org/10.1108/BPMJ-07-2016-0157

S. A. Khan, A. Chaabane, y F. Dweiri, “A knowledge-based system for overall supply chain performance evaluation: a multi-criteria decision making approach”, Supply Chain Management, vol.24, no.3, pp.377-396, 2019. DOI: https://doi.org/10.1108/SCM-06-2017-0197

S. Yildiz Çankaya, “The effects of strategic sourcing on supply chain strategies”, J. glob. oper. strateg. sourc., vol.13, no.2, pp.129-148, 2020. DOI: https://doi.org/10.1108/JGOSS-01-2019-0002

S. Routroy, y A. Behera, “Agriculture supply chain: A systematic review of literature and implications for future research”, J. agribus. dev. emerg. econ., vol.7, no.3, pp.275-302, 2017. DOI: https://doi.org/10.1108/JADEE-06-2016-0039

M. M. E. Beheiry, y K. S. Abdallah, “Developed priority rules support system for ELSP: a case study”, Int. j. ind. syst. eng., vol.32, no.3, p.405, 2019. DOI: https://doi.org/10.1504/ijise.2019.101330

E. Cagno, A. Neri, M. Howard, G. Brenna, y A. Trianni, “Industrial sustainability performance measurement systems: A novel framework”, J. Clean. Prod., vol.230, pp.1354–1375, 2019. DOI: https://doi.org/10.1016/j.jclepro.2019.05.021

M. F. Mubarak, S. Tiwari, M. Petraite, M. Mubarik, y R. Z. Raja Mohd Rasi, “How Industry 4.0 technologies and open innovation can improve green innovation performance?”, Manage. Environ. Qual., vol.32, no.5, pp.1007-1022, 2021. DOI: https://doi.org/10.1108/MEQ-11-2020-0266

P. K. Tarei, J. J. Thakkar, y B. Nag, “A hybrid approach for quantifying supply chain risk and prioritizing the risk drivers: A case of Indian petroleum supply chain”, J. Manuf. Technol. Manag., vol.29, no.3, pp.533-569, 2018. DOI: https://doi.org/10.1108/JMTM-10-2017-0218

L. Fratocchi, y C. Di Stefano, “Does sustainability matter for reshoring strategies? A literature review”, J. glob. oper. strateg. sourc., vol.12, no.3, pp.449-476, 2019. DOI: https://doi.org/10.1108/JGOSS-02-2019-0018

G. Rius-Sorolla, J. Maheut, S. Estellés-Miguel, y J. P. Garcia-Sabater, “Coordination mechanisms with mathematical programming models for decentralized decision-making: a literature review”, Cent. Eur. J. Oper. Res., vol.28, no.1, pp.61–104, 2020. DOI: https://doi.org/10.1007/s10100-018-0594-z

K. Onufrey, y A. Bergek, “Second wind for exploitation: Pursuing high degrees of product and process innovativeness in mature industries”, Technovation, vol.89, no.102068, p.102068, 2020. DOI: https://doi.org/10.1016/j.technovation.2019.02.004

B. Bruns, T. Becker, J. Riese, S. Lier, y B. Werners, “Efficient production of specialized polymers with highly flexible small‐scale plants”, Chem. Eng. Technol., vol.44, no.6, pp.1148–1152, 2021. DOI: https://doi.org/10.1002/ceat.202000591

M. A. Saliba, D. Zammit, y S. Azzopardi, “A study on the use of advanced manufacturing technologies by manufacturing firms in a small, geographically isolated, developed economy: the case of Malta”, Int. J. Adv. Manuf. Technol., vol.89, no.9–12, pp.3691–3707, 2017. DOI: https://doi.org/10.1007/s00170-016-9294-9

A. Pooya, y M. Faezirad, “A taxonomy of manufacturing strategies and production systems using self-organizing map”, J. Ind. Prod. Eng., vol.34, no.4, pp.300–311, 2017. DOI: https://doi.org/10.1080/21681015.2017.1305996

C. Martínez-Mora, y F. Merino, “Consequences of sustainable innovations on the reshoring drivers’ framework”, J. Manuf. Technol. Manag., vol.31, no.7, pp.1373-1390, 2020. DOI: https://doi.org/10.1108/JMTM-12-2019-0426

T. de Melo Duarte Borges, G. M. Devós Ganga, M. G. Filho, I. Delai, y L. A. Santa-Eulalia, “Development and validation of a cleaner production measurement scale”, J. Clean. Prod., vol.299, no.126907, p.126907, 2021. DOI: https://doi.org/10.1016/j.jclepro.2021.126907

M. Mubarik, R. Z. Raja Mohd Rasi, M. F. Mubarak, y R. Ashraf, “Impact of BC technology on green supply chain practices: evidence from emerging economy”, Manage. Environ. Qual., vol.32, no.5, pp.1023-1039, 2021. DOI: https://doi.org/10.1108/MEQ-11-2020-0277

P. Muganyi, I. Madanhire, y C. Mbohwa, “Business survival and market performance through Lean Six Sigma in the chemical manufacturing industry”, Int. j. lean six sigma, vol.10, no.2, pp.566-600, 2019. DOI: https://doi.org/10.1108/IJLSS-06-2017-0064

A. Prashar, “Adopting Six Sigma DMAIC for environmental considerations in process industry environment”, The TQM Journal, vol.32, no.6, pp.1241-1261, 2020. DOI: https://doi.org/10.1108/TQM-09-2019-0226

M. S. Kaswan, y R. Rathi, “An inclusive review of Green Lean Six Sigma for sustainable development: readiness measures and challenges”, Int. J. Adv. Oper. Manag., vol.13, no.2, p.129, 2021. DOI: https://doi.org/10.1504/ijaom.2021.116132

A. S. Patel, y K. M. Patel, “Critical review of literature on Lean Six Sigma methodology”, Int. j. lean six sigma, vol.12, no.3, pp.627-674, 2021. DOI: https://doi.org/10.1108/IJLSS-04-2020-0043

S. Kumar, y R. Anbanandam, “An integrated Delphi – fuzzy logic approach for measuring supply chain resilience: an illustrative case from manufacturing industry”, Meas. Bus. Excel., vol.23, no.3, pp.350-375, 2019. DOI: https://doi.org/10.1108/MBE-01-2019-0001

R. C. Basole, y M. Nowak, “Assimilation of tracking technology in the supply chain”, Transp. Res. Part E: Logist. Trans. Rev., vol.114, pp.350–370, 2018. DOI: https://doi.org/10.1016/j.tre.2016.08.003

J. J. A. Obiso, C. M. Himang, L. A. Ocampo, M. F. Bongo, S. A. A. Caballes, D. P. M. Abellana, C. C. Deocaris, R. Padua, y R. A. Jr. “Management of Industry 4.0 – reviewing intrinsic and extrinsic adoption drivers and barriers”, Journal International de La Gestion Technologique [Int. J. Technol. Manag.], vol.81, no.3/4, p.210, 2019. DOI: https://doi.org/10.1504/ijtm.2019.105310

K. Lazaretti, O. T. Giotto, S. Sehnem, y F. F. Bencke, “Building sustainability and innovation in organizations”, Benchmarking: An International Journal, vol.27, no.7, pp.2166-2188, 2020. DOI: https://doi.org/10.1108/BIJ-08-2018-0254

C. Dong, A. Akram, D. Andersson, P. O. Arnäs, y G. Stefansson, “The impact of emerging and disruptive technologies on freight transportation in the digital era: current state and future trends”, Int. J. Logist. Manag., vol.32, no.2, pp.386-412, 2021. DOI: https://doi.org/10.1108/IJLM-01-2020-0043

C. Singh, D. Singh, y J. S. Khamba, “In quest of green practices in manufacturing industries through literature review”, World J. Entrep. Manag. Sustain. Dev., vol.17, no.1, pp.30-50, 2021. DOI: https://doi.org/10.1108/WJEMSD-02-2019-0014

E. Naghi Ganji, S. Shah, y A. Coutroubis, “An examination of product development approaches within demand driven chains”, Asia Pacific Journal of Marketing and Logistics, vol.30, no.5, pp.1183-1199, 2018. DOI: https://doi.org/10.1108/APJML-02-2018-0042

J. Bröchner, T. Haugen, y C. Lindkvist, “Shaping tomorrow’s facilities management”, Facilities, vol.37, no.7/8, pp.366-380, 2019. DOI: https://doi.org/10.1108/F-10-2018-0126

S. Ahmad, K. Y. Wong, y S. Rajoo, “Sustainability indicators for manufacturing sectors: A literature survey and maturity analysis from the triple-bottom line perspective”, J. Manuf. Technol. Manag., vol.30, no.2, pp.312-334, 2019. DOI: https://doi.org/10.1108/JMTM-03-2018-0091

S. Hartini, U. Ciptomulyono, M. Anityasari, y Sriyanto. “Manufacturing sustainability assessment using a lean manufacturing tool: A case study in the Indonesian wooden furniture industry”, Int. j. lean six sigma, vol.11, no.5, pp.943-971, 2020. DOI: https://doi.org/10.1108/IJLSS-12-2017-0150

J. Malek, y T. N. Desai, “A systematic literature review to map literature focus of sustainable manufacturing”, J. Clean. Prod., vol.256, no.120345, p.120345, 2020. DOI: https://doi.org/10.1016/j.jclepro.2020.120345

Y. Wang, y J. Yang, “Role of supplier involvement and project leader in SNPD: a conceptual model and exploratory case study”, Int. j. manag. proj. bus., vol.14, no.4, pp.960-981, 2021. DOI: https://doi.org/10.1108/IJMPB-07-2020-0206

A. E. Narayanan, R. Sridharan, y P. N. Ram Kumar, “Analyzing the interactions among barriers of sustainable supply chain management practices: A case study”, J. Manuf. Technol. Manag., vol.30, no.6, pp.937-971, 2019. DOI: https://doi.org/10.1108/JMTM-06-2017-0114

C. M. Durugbo, “Affordance-based problem structuring for workplace innovation”, Eur. J. Oper. Res., vol.284, no.2, pp.617–631, 2020. DOI: https://doi.org/10.1016/j.ejor.2019.12.044

T. Kovács, A. Kő, y K. Demeter, “Measuring the impact of lean practices on manufacturing performance – case study from the process industry”, Int. j. lean six sigma, vol.11, no.6, pp.1193-1218, 2020. DOI: https://doi.org/10.1108/IJLSS-01-2019-0004

S. S. Kamble, A. Gunasekaran, V. Kumar, A. Belhadi, y C. Foropon, “A machine learning based approach for predicting BC adoption in supply Chain”, Technol. Forecast. Soc. Change, vol.163, no.120465, p.120465, 2021. DOI: https://doi.org/10.1016/j.techfore.2020.120465

H. Sayyadi Tooranloo, M. Alavi, y S. Saghafi, “Evaluating indicators of the agility of the green supply chain”, Competitiveness Review, vol.28, no.5, pp.541-563, 2018. DOI: https://doi.org/10.1108/CR-01-2017-0009

T. Pereira, J. V. Kennedy, y J. Potgieter, “A comparison of traditional manufacturing vs additive manufacturing, the best method for the job”, Procedia Manuf., vol.30, pp.11–18, 2019. DOI: https://doi.org/10.1016/j.promfg.2019.02.003

M. Aboelmaged, y G. Hashem, “Absorptive capacity and green innovation adoption in SMEs: The mediating effects of sustainable organisational capabilities”, J. Clean. Prod., vol.220, pp.853–863, 2019. DOI: https://doi.org/10.1016/j.jclepro.2019.02.150

S. E. Birkie, y P. Trucco, “Do not expect others do what you should! Supply chain complexity and mitigation of the ripple effect of disruptions”, Int. J. Logist. Manag., vol.31, no.1, pp.123-144, 2020. DOI: https://doi.org/10.1108/IJLM-10-2018-0273

J. Um, y N. Han, “Understanding the relationships between global supply chain risk and supply chain resilience: the role of mitigating strategies”, Supply Chain Manage, vol.26, no.2, pp.240-255, 2021. DOI: https://doi.org/10.1108/SCM-06-2020-0248

C. R. Vishnu, R. Sridharan, A. Gunasekaran, y P. N. Ram Kumar “Strategic capabilities for managing risks in supply chains: current state and research futurities”, J. Adv. Manag. Res., vol.17, no.2, pp.173-211, 2020. DOI: https://doi.org/10.1108/JAMR-04-2019-0061

M. Öhman, A. Arvidsson, P. Jonsson, y R. Kaipia, “A knowledge-based view of analytics capability in purchasing and supply management”, Int. j. phys. distrib. logist. manag., vol.51, no.9, pp.937-957, 2021. DOI: https://doi.org/10.1108/IJPDLM-12-2020-0415

K. Tieng, C. Jeenanunta, P. Chea, y N. Rittippant, “Roles of customers in upgrading manufacturing firm technological capabilities toward industry 4.0”, Eng. Manag. J., pp.1–12, 2021. DOI: https://doi.org/10.1080/10429247.2021.1922219

H. De Goey, P. Hilletofth, y L. Eriksson, “Design-driven innovation: a systematic literature review”, European Business Review, vol.31, no.1, pp.92-114, 2019. DOI: https://doi.org/10.1108/EBR-09-2017-0160

E. Rasti Borazjani Faghat, N. Khani, y A. Alemtabriz, “A paradigmatic model for shared value innovation management in the supply chain: A grounded theory research”, Int. J. Innov. Sci., vol.12, no.1, pp.142-166, 2020. DOI: https://doi.org/10.1108/IJIS-07-2019-0074

P. K. Tarei, J. J. Thakkar, y B. Nag, “Benchmarking the relationship between supply chain risk mitigation strategies and practices: an integrated approach”, Benchmarking: An International Journal, vol.27, no.5, pp.1683-1715, 2020. DOI: https://doi.org/10.1108/BIJ-12-2019-0523

W. Ahmed, M. S. Ashraf, S.A. Khan, S. Kusi-Sarpong, F. K. Arhin, H. Kusi-Sarpong, y A. Najmi, “Analyzing the impact of environmental collaboration among supply chain stakeholders on a firm’s sustainable performance”, Oper. Manag. Res., vol.13, no.1–2, pp.4–21, 2020. DOI: https://doi.org/10.1007/s12063-020-00152-1

S. Benzidia, N. Makaoui, y O. Bentahar, “The impact of big data analytics and artificial intelligence on green supply chain process integration and hospital environmental performance”, Technol. Forecast. Soc. Change, vol.165, no.120557, p.120557, 2021. DOI: https://doi.org/10.1016/j.techfore.2020.120557

Published

2022-08-10

How to Cite

[1]
J. E. Rodríguez Camacaro and E. M. Verruschi Pigliacampo, “La Technological management in the supply chain in chemical companies: a review on binding terms 2011-2021”, Publ.Cienc.Tecnol, vol. 16, no. 2, pp. 81-115, Aug. 2022.

Issue

Section

Review Article