Use of adherent additives in designing asphalt hot mixtures: a review
DOI:
https://doi.org/10.13140/RG.2.2.18901.55520Keywords:
asphalt mix, moisture damage, adherent additives, cracking from fatigueAbstract
Considering the need to guarantee a useful and durable life of road surfaces, the development of new materials has been generated that ensure the adherence between bitumen and aggregates, being able to combat the failure caused by humidity. In this literary review, different scientific articles were analyzed in order to determine the performance of the different adherents used in hot asphalt mixes, the optimal percentages, and the different methods used to find resistance to moisture. It was found that the different adherent additives, both natural and chemical, show exceptional performance against moisture resistance, providing a long-lasting useful life for the pavement, in different optimal percentages that vary according to the aggregate used in the mixture. The most widely used methods to determine moisture resistance were the pull-out test, Vialit adhesion, modified Lottman test, and boiling water test
Downloads
References
A. Modarres y M. Rahmanzadeh, «Application of coal waste powder as filler in hot mix asphalt,» Construction and Building Materials, vol. 66, p. 476–483, 2014
B. Sengoz y J. Oylumluoglu, «Utilization of recycled asphalt concrete with different warm mix asphalt additives prepared with different penetration grades bitumen» Construction and Building Materials, vol. 45, p. 173–183, 2013
T. Yee y M. Hamzah, «Asphalt mixture workability and effects of long-term conditioning methods on moisture damage susceptibility and performance of warm mix asphalt» Construction and Building Materials, vol. 207, p. 316–328, 2019
L. Zhou , W. Huang, F. Xiao y Q. Lv, «Shear adhesion evaluation of various modified asphalt binders by an innovative testing method» Construction and Building Materials, vol. 183, p. 253–263, 2018
F. Moghadas, M. Arabani, G. Hamedi y A. Azarhoosh, «Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt» Construction and Building Materials, vol. 47, p. 1523–1527, 2013
L. Zhou, W. Huang, Y. Zhang, Q. Lv, C. Yan y Y. Jiao, «Evaluation of the adhesion and healing properties of modified asphalt binders» Construction and Building Materials, vol. 251, pp. 1-12, 2020
T. Valentová, J. Altman y J. Valentin, «Impact of asphalt ageing on the activity of adhesion promoters and the moisture susceptibility» Transportation Research Procedia, vol. 14, p. 768 – 777, 2016
J. Aguiar, A. Baldi, J. Salazar, J. Pacheco, L. Loria, F. Reyes y N. Cely, «Adhesive properties of asphalts and aggregates in tropical climates» International Journal of Pavement Engineering, vol. 19, pp. 1-11, 2016
K. H. Al Helo, Z. I. Qasim y D. A. Khalaf, «Evaluation of moisture-induced damage of stone matrix asphalt mixture with polymer modified binder» Materials Science and Engineering, vol. 737, nº 8, pp. 738-747, 2020
A. Azarhoosh, F. Moghaddas y A. Khodaii, «Evaluation of the effect of nano-TiO2 on the adhesion between aggregate and asphalt binder in hot mix asphalt» European Journal of Environmental and Civil Engineering, vol. 22, nº 8, pp. 946-961, 2016
H. Gibreil y C. Feng, «Effects of high-density polyethylene and crumb rubber powder as modifiers on properties of hot mix asphalt» Construction and Building Materials, vol. 142, pp. 101-108, 2014
G. Hamedia y S. Tahami, «The Effect of Using Anti-Stripping Additives on Moisture Damage of Hot Mix Asphalt» International Journal of Adhesion and Adhesives, vol. 81, pp. 90-97, 2017
L. Wang, A. Shen y J. Yao, «Effect of different coarse aggregate surface morphologies on cement emulsified asphalt adhesion» Construction and Building Materials, vol. 262, pp. 1-15, 2020
J. Zhu, K. Zhang, K. Liu y X. Shi, «Adhesion characteristics of graphene oxide modified asphalt unveiled by surface free energy and AFM-scanned micro-morphology» Construction and Building Materials, vol. 244, nº 1-12, 2020
S. Foroutan, M. Khabiri, A. Kavussi y M. Jalal , «Applying surface free energy method for evaluation of moisture damage in asphalt mixtures containing date seed ash» Construction and Building Materials, vol. 125, p. 408–416, 2016
A. Dulaimi, H. Shanbara, H. Jafer y M. Sadique, «An evaluation of the performance of hot mix asphalt containing calcium carbide residue as a filler» Construction and Building Materials, vol. 261, pp. 1-10, 2020
A. Akbari y A. Modarres, «Effect of clay and lime nano-additives on the freeze–thaw durability of hot mix asphalt» Road Materials and Pavement Design, vol. 18, nº 3, pp. 646-669, 2016
G. Hamedi, F. Nejad y K. Oveisi, «Estimating the moisture damage of asphalt mixture modified with nano zinc oxide» Materials and Structures, vol. 49, p. 1165–1174, 2015
G. Hamedia, A. Sahraeia y M. Esmaeeli, «Investigate the effect of using polymeric anti-stripping additives on moisture damage of hot mix asphalt» European Journal of Environmental and Civil Engineering, vol. 22, pp. 1-15, 2018
S. Han, S. Dong, M. Liu, X. Han y Y. Liu, «Study on improvement of asphalt adhesion by hydrated lime based on surface free energy method» Construction and Building Materials, vol. 227, pp. 1-9, 2019
Y. Kim, I. Pinto y S. Park, «Experimental evaluation of anti-stripping additives in bituminous mixtures through multiple scale laboratory test results» Construction and Building Materials, vol. 29, p. 386–393, 2012
G. Hossein, K. Shamami y M. Pakenari, «Effect of ultra-high-molecular-weight polyethylene on the performance characteristics of hot mix asphalt» Construction and Building Materials, vol. 258, pp. 1-14, 2020
S. Rahmad, N. Yusoff, S. Rosyidi, K. Badri y I. Widyatmoko, «Effects of Rediset on the adhesion, stripping, thermal and surface morphologies of PG76 binder» Construction and Building Materials, vol. 241, pp. 1-12, 2020
M. Alam y P. Aggarwal, «Effectiveness of anti stripping agents on moisture susceptibility of bituminous mix» Construction and Building Materials, vol. 264, pp. 1-15, 2020
D. Park, W.-J. Seo, J. Kim y H. Vo, «Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents» Construction and Building Materials, vol. 144, p. 399–405, 2017
A. Khodaii, V. Khailfeh, M. Dehand y G. Hamedi, «Evaluating the effect of Zycosoil on moisture damage of hot mix asphalt using the surface energy method» Journal of Materials in Civil Engineering, vol. 26, nº 2, pp. 1-37, 2014
H. Behbahani, H. Ziari, N. Kamboozia, A. Khaki y S. Mirabdolazimi, «Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive» Construction and Building Materials, vol. 78, p. 60–68, 2015
M. Ameri, S. Kouchaki y H. Roshani, «Laboratory evaluation of the effect of nano-organosilane anti-stripping additive on the moisture susceptibility of HMA mixtures under freeze–thaw cycles» Construction and Building Materials, vol. 48, p. 1009–1016, 2013
G. Hamedi, M. Asadi, F. Nejad y M. Esmaeeli, «Applying asphalt binder modifier in reducing moisture-induced damage of asphalt mixtures» European Journal of Environmental and Civil Engineering, vol. 23, pp. 1-19, 2019.
M. Arabania y G. Hamedia, «Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt» International Journal of Pavement Engineering, vol. 15, nº 1, pp. 66-78, 2014
S. Yang, F. Rachman y H. Susanto, «Effect of moisture in aggregate on adhesive properties of warm-mix asphalt» Construction and Building Materials, vol. 190, p. 1295–1307, 2018.
N. Awazhar, F. Khairuddin, S. Rahmad, S. Fadzil, A. Hend, N. Yusoff y K. Badri, «Engineering and leaching properties of asphalt binders modified with polyurethane and Cecabase additives for warm-mix asphalt application» Construction and Building Materials, vol. 238, pp. 1-11, 2020.
G. Hamedi y F. Nejad, «Evaluating the Effect of Mix Design and Thermodynamic Parameters on Moisture Sensitivity of Hot Mix Asphalt» Journal of Materials in Civil Engineering, vol. 29, nº 2, pp. 1-11, 2016.
H. Rahmani, G. Hamedi y H. Shirmohammadi, «Effect of Asphalt Binder Aging on Thermodynamic Parameters and Its Relationship with Moisture Sensitivity of Asphalt Mixes» Journal of Materials in Civil Engineering, vol. 30, nº 11, pp. 1-11, 2018.
S. Liu, S. Zhou y A. Peng, «Analysis of moisture susceptibility of foamed warm mix asphalt based on cohesion, adhesion, bond strength, and morphology» Journal of Cleaner Production, vol. 277, pp. 1-12, 2020.
M. Nazirizad, A. Kavussi y A. Abdi , «Evaluation of the effects of anti-stripping agents on the performance of asphalt mixtures» Construction and Building Materials, vol. 84, p. 348–353, 2015.
H. Ziari y . A. Moniri, «Laboratory evaluation of the effect of synthetic Polyolefin-glass fibers on performance properties of hot mix asphalt» Construction and Building Materials, vol. 213, p. 459–468, 2019.
J. Zhu, K. Zhang, K. Liu y X. Shi, «Performance of hot and warm mix asphalt mixtures enhanced by nano-sized graphene oxide» Construction and Building Materials, vol. 217, p. 273–282, 2019
F. Nejad1, G. Hamedi y A. Azarhoosh, «The Use of Surface Free Energy Method to Evaluate the Mechanism of the Effect of Hydrate Lime on Moisture Damage of Hot Mix Asphalt» Journal of Materials in Civil Engineering, vol. 25, nº 8, pp. 1-32, 2013
H. Jahanian, G. Shafabakhsh y . H. Divandari, «Performance evaluation of Hot Mix Asphalt (HMA) containing bitumen modified with Gilsonite» Construction and Building Materials, vol. 131, p. 156–164, 2017.
M. Choi, Y. Kim, H. Kim y J. Lee, «Performance evaluation of the use of tire-derived fuel fly ash as mineral filler in hot mix asphalt concrete» Journal of traffic and transportation engineering, vol. 7, nº 2, pp. 249-258, 2019.
L. Klinsky, K. Kaloush, V. Faria y V. Bardini, «Performance characteristics of fiber modified hot mix asphalt» Construction and Building Materials, vol. 176, p. 747–752, 2018.
H. Haghshenas, A. Khodaii y M. Saleh, «Long term effectiveness of anti-stripping agents» Construction and Building Materials, vol. 76, p. 307–312, 2015
C. Gorkem y S. Burak, «Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime» Construction and Building Materials, vol. 23, p. 2227–2236, 2009
H. Abandansari y A. Modarres , «Investigating effects of using nanomaterial on moisture susceptibility of hot-mix asphalt using mechanical and thermodynamic methods» Construction and Building Materials, vol. 131, pp. 667-675, 2016
A. Ameli, N. Norouzi, E. Khabbaz y R. Babagoli, «Influence of anti stripping agents on performance of binders and asphalt mixtures containing Crumb Rubber and Styrene-Butadiene-Rubber» Construction and Building Materials, vol. 261, pp. 1-16, 2020
T. Ahmed, H. Lee y R. Williams, «Using a Modified Asphalt Bond Strength Test to Investigate the Properties of Asphalt Binders with Poly Ethylene Wax-based Warm Mix Asphalt Additive» International Journal of Pavement Research and Technology, vol. 11, nº 1, pp. 28-37, 2017
V. Haritonovs, «Evaluation of polyaminoamide as a surfactant additive» The Baltic Journal of Road and Bridge Engineering, vol. 10, nº 2, p. 112–117, 2015
C. Zhu, J. Tang, H. Zhang y H. Duan, «Effect of liquid anti-stripping agents on moisture sensitivity of crumb rubber modified asphalt binders and mixtures» Construction and Building Materials, vol. 225, p. 112–119, 2019
H. Zhang, M. Huang, J. Hong, F. Lai y Y. Gao, «(2-hidroxietil) de tereftalato (BHET) terephthalate on adhesive properties of asphalt-aggregate interface» Fuel, vol. 285, pp. 1-14, 2020
Published
How to Cite
Issue
Section
Copyright (c) 2021 Reinerio Elden Vasquez Llamo, Wily Rogelio Vasquez Ramírez; Sócrates Pedro Muñoz Pérez
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyrights of the author / s from the year of publication
This work is under international license Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0.
The opinions expressed by the authors do not necessarily reflect the position of the editor of the publication or UCLA. The total or partial reproduction of the texts published here is authorized, provided that the complete source and electronic address of this journal is cited. Authors have the right to use their articles for any purpose as long as it is done nonprofit. The authors can post on the internet or any other media the final approved version of their work.
.png)
